GLOBAL BRIDGE LABS
← All posts/BPO & Operations

80/20, 90/10 or 70/30: which service level target?

80/20, 90/10, 70/30 and other service level targets compared: what each one means for callers and staffing, and how to pick one for your business.

By Dhanushka Pinto, Co-founder / DirectorPublished 3 min read
80/20 vs 90/10 service level: key takeaways infographic by Global Bridge Labs
Key takeaways from this article. Share it with the link and credit Global Bridge Labs.
On this page

Key takeaways

Service level targets pair a percentage with a number of seconds. 80/20 is the familiar default, 90/10 is a premium target for urgent or high-value lines, and 70/30 or 80/30 suit lower-pressure lines. Each step up costs more staff for a smaller gain. Pick the target that matches what callers expect and what a lost call costs.

  • 80/20 is a common default, not a standard.
  • 90/10 suits urgent or high-value calls.
  • 70/30 suits low-pressure or complex lines.
  • Higher targets cost more for each extra point.

Not sure which target fits your callers? Message us on WhatsApp.

Chat on WhatsApp →

What do the common targets mean?

The first number is the share of calls, and the second is the seconds allowed. 80/20 means 80% of calls answered within 20 seconds. 90/10 means 90% within ten seconds, which is roughly two rings. 70/30 means 70% within 30 seconds. Some teams add a second rule, such as no call waiting longer than three minutes.

When does 90/10 make sense?

A tighter target makes sense when callers will not wait and each call is valuable or urgent: emergency call-outs, sales lines where callers ring the next firm, or clinical and safety lines. It needs noticeably more people per half hour, so it is usually applied only to the lines or hours that justify it.

When is 70/30 or 80/30 enough?

Looser targets suit lines where callers expect to wait a little and value a full answer: account queries, complex advice, or internal helpdesks. They also suit very small teams, where hitting 80/20 every half hour would mean people sitting idle most of the day.

Want your current figures compared against two or three targets? Send them to us on WhatsApp.

Chat on WhatsApp →

How do you choose between them?

Start with your callers. How long do they wait before hanging up, and what happens to a caller who gives up? Then look at cost: work out what each target needs in people per busy half hour. Finally, check the experience after the answer, because a fast answer followed by a transfer is not good service.

  • Measure how long callers wait before giving up.
  • Price each target in staff hours.
  • Check resolution, not only speed.

What does this look like in practice?

A pattern we see: a firm sets 90/10 for every line and struggles to hit it. Splitting the target, 90/10 on the new enquiries line and 80/30 on account queries, puts people where speed matters most and both targets start being met.

Service level target checklist

  • List your lines and caller types.
  • Note how long callers wait before hanging up.
  • Price two or three targets in staff hours.
  • Set different targets by line if needed.
  • Write each target down with its formula.

Next step

Choose a target for each line, write down the threshold and formula, and review it after a month of half-hourly reports.

Message us on WhatsApp to compare targets for your lines, or book a 30-minute consultation.

Chat on WhatsApp →

Sources and further reading

Frequently asked questions

Is 80/20 the industry standard?

It is the most common convention, but it is not a legal or industry requirement. Many contact centres use it because it balances caller experience and staffing cost reasonably well. Your target should reflect your callers, your sector and what a lost call costs your business, not just habit.

Can I have different targets for different lines?

Yes, and it often works better. A sales or emergency line can have a tighter target than an accounts line. Your phone system needs separate queues to measure them, and your rota should show which people cover which queue at each time of day.

What is a 90/10 service level?

It means 90% of calls are answered within ten seconds, roughly two rings. It is a demanding target used for urgent or high-value lines. It needs more people per half hour than 80/20, so most businesses apply it only to the lines or hours that really need it.

Written by

Dhanushka Pinto
Dhanushka Pinto
Co-founder / Director

Global Bridge Labs (GBL) is a UK–Sri Lanka partner for social media, websites and BPO. Everything here comes from client delivery, not theory.

Share this article

Reading is good.
Fixing is better.

30 minutes with our team and you'll leave knowing which of the three problems to fix first.

Get a Free Quote →
Keep reading